|
6620DT
Wide tracks and a heavy-duty undercarriage provide the foundation for the 6620DT's robust design. The stronger, wider undercarriage allows this direct push machine to be used on concrete or pavement, and enables the machine to readily negotiate in tight, confining work areas and on off-road, rugged terrain. The machine has 12-inch tracks and the overall width of the machine is 60 inches which means the undercarriage can provide a stable base for direct push operations. The added strength of the undercarriage also means you can add a winch to help with tool placement and tripping, or operate the Auto Drop Hammer. The overall ground speed of the 6620DT ranges from a crawl, for close maneuvering, to the 4.5 mph for field movement.
A two-speed pull cylinder on the 6620DT at low speed (full pulling power) will pull rods full stroke (66 inches) in eleven seconds. On high speed, the machine can cycle from bottom to top in less than 5 seconds.
Other features on the machine include a wireless remote control and onboard tool storage.
|
